Measuring for an Inside Recess Blind Fit (Recess Measurement)

Using a metal tape measure (cloth ones can stretch), take the width of the visible window frame at the top, middle, and bottom of the frame. Record the narrowest measurement.

Next, measure the height (drop) of the visible window frame at both sides and in the middle. Record the smallest measurement.

No need to make any deductions; Meerkat Blinds will handle that for you to ensure the perfect fit.

Pro Tip for Roller Blinds

When measuring for roller blinds, simply take the width measurement at the top of the recess. The fabric will be slightly narrower than the total width, which includes the controls and brackets.

Top Tips for Measuring Inside a Window Recess

Ensure your window recess is deep enough to accommodate the blind. Check for any obstructions within the recess, like window handles, that might affect the fit.

Here are the minimum recess depths required for each type of blind to fit properly:

  • Roller Blinds (Face-Fix): 70mm
  • Roller Blinds (Top-Fix): 50mm
  • 25mm Real Wood & Faux Wood Blinds: 55mm
  • 35mm Real Wood & Faux Wood Blinds: 55mm
  • 50mm Real Wood & Faux Wood Blinds: 65mm
  • 25mm Aluminium Venetian Blinds: 30mm
  • Roman Blinds: 50mm
  • Vertical Blinds: 75mm
  • Day & Night Roller Blinds (Face-Fix): 75mm
  • Day & Night Roller Blinds (Top-Fix): 55mm
 

Pro Tip for Roller Blinds

For roller blinds, the process is a bit different. Measure the width at the top of the window recess and also the width between the tiles. If the difference between these two measurements is less than 30mm, use the top measurement for your ‘recess size’. If the difference is greater than 30mm, deduct 5mm from the width between the tiles and choose the ‘fabric size’ option when placing your order.

Pro Tip for Blackout Roller Blinds

To ensure as little light leakage as possible around the edges of the blind, we recommend fitting blackout blinds outside the window recess wherever possible.

Measuring for a Blind to Fit Outside the Window Recess (Exact Size)

To measure for a blind intended to fit outside the window recess we recommend an overlap of 10cm to each edge as shown in the illustration.

Measure as for a recess fit (above) and add 20cm to each measurement.

If the window sill protrudes far enough to obstruct the blind, only add 10cm to the height (drop) and allow the blind to sit on the sill.

Pro Tip for Roller Blinds

 

When ordering roller blinds, keep in mind that the total width, including controls and brackets, is generally about 34mm wider than the fabric itself (or 43mm wider for a day & night roller blind). You have two options:

  • Exact Size: We’ll make the blind to your exact measurements, bracket to bracket.
  • Fabric Size: We’ll cut the fabric to your specified width, meaning the overall blind will be slightly wider to accommodate the controls and brackets.

Measuring for a Replacement Blind

If you’re replacing an existing blind and want the new one to be the same size, simply measure the full width (including brackets or fittings) and the height (drop). Then, select the ‘Exact Size’ option when placing your order to ensure a perfect fit.

How to Measure for Bay Window Blinds

Select your bay window type below to access our simple step-by-step measuring guide.

Guide for Measuring Angled Bay Windows

Square Bay Window Measuring Guide

©2024. Meerkat Blinds. All Rights Reserved.